This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. It is waterproof and ready to install. This sensor is NOT compatible with ArduSub or the BlueROV2.


The Bar02 Ultra-High Resolution 10m Depth/Pressure Sensor is a low-pressure, high resolution, high accuracy version of our Bar30 sensor. Using the MS5837-02BA sensor from Measurement Specialties, this device can measure up to 10 meter depth (2 bar absolute pressure) with a water depth resolution of just 0.16mm! It can also measure altitude in air using air pressure with a resolution of 13cm. It’s housed in the same penetrator form factor as the Bar30 and can handle up to 10 bar absolute pressure (90 meter water depth).

One of the key features of this version of the sensor compared to the Bar30 sensor is the very high accuracy. According to the datasheet, the worst case accuracy is about +/- 4 mbar (4 cm water depth).

The sensor communicates over I2C. It operates on 3.3V I2C voltage but can accept power input up to 5.5V. It comes standard with a 4-pin DF13 connector, however it is not compatible with ArduSub or the BlueROV2.

This sensor includes a temperature sensor accurate to ±2°C, with data also accessible through I2C. If you need something with more temperature accuracy, please check out the Celsius Temperature Sensor.

The electrical schematic and board layout are open-source and the design files are available in the Technical Details tab. Feel free to adapt for your own needs.

The gel-filled sensor must be completely dried once per day or the pressure and temperature readings will drift.



BlueRobotics
Sensors and Sonars
Bar02 Ultra High Resolution 10m Depth/Pressure Sensor - Marine Thinking
Bar02 Ultra High Resolution 10m Depth/Pressure Sensor - Marine Thinking
Bar02 Ultra High Resolution 10m Depth/Pressure Sensor - Marine Thinking
  • SKU: BAR02-10M-SEN-BR

Bar02 Ultra High Resolution 10m Depth/Pressure Sensor

$105.99
This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. It is waterproof and ready to install. This sensor is NOT compatible with ArduSub or the BlueROV2.

    This pressure sensor can measure up to 2 bar absolute pressure (10m depth) with a depth resolution of 0.16mm and an in-air altitude resolution of 13cm. It is waterproof and ready to install. This sensor is NOT compatible with ArduSub or the BlueROV2.


    The Bar02 Ultra-High Resolution 10m Depth/Pressure Sensor is a low-pressure, high resolution, high accuracy version of our Bar30 sensor. Using the MS5837-02BA sensor from Measurement Specialties, this device can measure up to 10 meter depth (2 bar absolute pressure) with a water depth resolution of just 0.16mm! It can also measure altitude in air using air pressure with a resolution of 13cm. It’s housed in the same penetrator form factor as the Bar30 and can handle up to 10 bar absolute pressure (90 meter water depth).

    One of the key features of this version of the sensor compared to the Bar30 sensor is the very high accuracy. According to the datasheet, the worst case accuracy is about +/- 4 mbar (4 cm water depth).

    The sensor communicates over I2C. It operates on 3.3V I2C voltage but can accept power input up to 5.5V. It comes standard with a 4-pin DF13 connector, however it is not compatible with ArduSub or the BlueROV2.

    This sensor includes a temperature sensor accurate to ±2°C, with data also accessible through I2C. If you need something with more temperature accuracy, please check out the Celsius Temperature Sensor.

    The electrical schematic and board layout are open-source and the design files are available in the Technical Details tab. Feel free to adapt for your own needs.

    The gel-filled sensor must be completely dried once per day or the pressure and temperature readings will drift.



    Parameter

    Value

    Electrical

    Supply Voltage

    2.5 - 5.5 volts

    I2C Logic Voltage (SDA and SCL)

    2.5 - 3.6 volts

    Peak Current

    1.25 mA

    Mating Connector

    4-pos JST GH available on Digi-Key

    Pressure

    Maximum Mechanical Pressure

    10 bar*

    145 psi*

    Standard Operating Pressure

    0.3 - 1.2 bar

    4 - 17 psi

    Extended Operating Pressure

    0.01 - 2 bar

    0.15 - 29 psi

    Operating Depth

    10m

    33 ft

    Relative Accuracy (0-60°C)

    ± 2 mbar (2 cm in fresh water)

    ± .03 psi (0.8 inches in fresh water)

    Relative Accuracy (-20-85°C)

    ± 4 mbar (4 cm in fresh water)

    ± .06 psi (1.6 inches in fresh water)

    Resolution

    .016 mbar (.16 mm in fresh water, 13cm in air at sea level)

    Temperature

    In Air Operating Temperature

    -20 to +85°C

    -4 to 185°F

    In Water Operating Temperature

    2 to 40°C

    35.6 to 104°F

    Storage Temperature

    -40 to +85°C

    -40 to 185°F

    Relative Accuracy

    ± 2°C (between -20 to +85°C)

    ± 3.6°F

    Physical

    Recommended Through Hole Size

    10.2 mm

    13/32"

    Interfacing

    ArduSub Compatible?

    No

    Development Libraries

     MS5837 Arduino,
     MS5837 Python

    2D Drawings 




    You Might Also Need

    Recently Viewed Products

    BACK TO TOP